Drum Tom Mount
A drum set is like a well-built house with foundation and framework. This framework includes drum pedals, stands, toms, lugs, hoops, tension rods, and drum racks. And the foundations are the drum shells. All these together make up the drum hardware of the drum. Just like a house cannot be built without foundation and pillars, the drum is incomplete without the hardware because it acts as the pillar of the drum. Each of the hardware has different role to play.
Drum hardware basically refers to various kinds of stands that hold up the drum and the cymbals. Let us start with the most important pieces that play a vital role in building up the drum set as well as drum sound.
The pieces of metal that are attached to the side of the drum are the lugs. The main aim of the lugs is to attach the drum hoops or rim, which is fixed with the help of tension rods. Hoops mainly hold the drumhead in place and even help in tuning the drum.
Coming to the drum shells, it refers to the material used in the drum. Like, beginner's kits are made up of basswood or mahogany but higher kits are made up of more costly woods to get better sound quality.
Adding next piece of the drum hardware, i.e. the pedals. They are available in different types like, single chain drive, dual chain, belt driven, single spring pedal, dual spring pedal and pedal with footboards. Among them the dual chain pedals are harder and can take heavy foot. Even pedals with dual spring are much better than the single one. The footboard pedals are the high-end pedals and are strongest. Therefore, a combination of dual chain, dual spring and footboard makes a tough pedal.
Next important parts of the drum hardware are the stands. Stands give support to the whole set to provide proper positioning to it. The types includes:
- Boom stand: The most longest of the other hardware, the boom stand provides easy positioning to the cymbals anywhere around the kits.
- Cymbal stand: This drum hardware not only supports the cymbals but also hold toms, cowbells and tambourines as well.
- Hi-Hat stand: This is one of the vital parts of the hardware. It is like a straight cymbal stand that has a spring-operated pedal connected to a rod that opens and closes the top hi-hat cymbal. This cymbal is linked with the clutch that has a hole in the middle where the rod fits and is protected in the open position by a screw. The drummer needs to place both the feet on the pedal, while using hi-hats in the closed position, and just hit the lever and the hats drop. And has to do vice-versa to reset it to the open position.
- Snare stand: A snare is played most of the time and so it is necessary to have a solid snare stand. It is better to use double braced snare stand rather than using single braced that are light weighted and move often.
Another important part of the drum hardware is the toms. They are greater than the stands by 14'' and have legs to stand on their own. Once the drum is assembled it is mounted on the toms. It should be mentioned here that the sound quality of the drum depends on its positioning on the toms.
About the Author:
Victor Epand is an expert consultant for guitars, drums, and synthesizers. You can find the best marketplace for guitars, drums, and synthesizers at these 3 sites: guitars, electric guitars, drums, drum hardware, and synthesizers, keyboards.
Article Source: ArticlesBase.com - Drum Hardware for a Complete Drum Set
 |
 VINTAGE DRUM Gambles Import Japan MIJ Red Sparkle Toms tom drumS 12 slot mount $67.50 Time Remaining: 44m Buy It Now for only: $67.50 |
 VINTAGE DRUM Red Sparkle Slot Mount tom drumS 13 Gambles Import Japan MIJ Toms $69.75 Time Remaining: 44m Buy It Now for only: $69.75 |
 Custom Galaxy Black 13 x 9 Tom 6 Lug Nice wood Single Arm mount $28.00 Time Remaining: 1h 2m |
 ddrum dios 10x7 all maple tom in transparent black with suspension mount new $145.00 Time Remaining: 5h 29m Buy It Now for only: $145.00 |
 taye studio birch 13x9 tom white with suspension mount new $99.00 Time Remaining: 5h 29m Buy It Now for only: $99.00 |
 taye pro x 13x10 tom silver sparkle with suspension mount new $78.00 Time Remaining: 5h 29m Buy It Now for only: $78.00 |
 ddrum dios maple 10x7 tom white with pole lugs and suspension mount new $145.00 Time Remaining: 5h 29m Buy It Now for only: $145.00 |
 ddrum dios ash 10x7 tom pole lugs with suspension mount and tom mount new $115.00 Time Remaining: 5h 29m Buy It Now for only: $115.00 |
 mapex dual tom mount with center clamp chrome $99.00 Time Remaining: 5h 29m Buy It Now for only: $99.00 |
 taye tour pro 12x9 tom with suspension mount purple plum new $88.00 Time Remaining: 5h 29m Buy It Now for only: $88.00 |
For comparison shopping
we also bring you the results below from amazon.com
 |
Audix F2 Dynamic Tom Microphone Drum Mic With Audix DVice
Sale Price: Too low to display  |
DescriptionThis specially priced package for the Audix F2 tom microphone comes with an Audix DVice rim mount and a cable so you can hook this microphone up to your existing equipment as soon as you open the box. |
 |
CAD PRO-7 7-Piece Drum Microphone Pack
List Price: |
DescriptionThis all-in-one drum microphone package by CAD contains one KM212 dynamic cardioid kick drum mic, 3 TM211 dynamic cardioid tom mics with attached drum mount clips, one SN 210 dynamic cardioid snare mic with attached drum mount clip, and 2 CM 217 cardioid mini pencil condenser overhead microphones with external roll-off and pad... |
 |
On Stage DM50 On Stage DM50 Drum Mic Clip (Rim Mount)
List Price: |
DescriptionThe isolation cylinders on this clip dampen unwanted vibrations while miking your drum. Fits 6? ? 18? diameter drums with rims as tall as 1 3/8". Works with most flanged, die-cast, and percussion rims... |
 |
Shure PGDMK6-XLR Drum Microphone Kit with XLR-XLR Cable
List Price: |
DescriptionAn essential drum mic package, the affordable PGDMK6 drum microphone kit combines two PG81 instrument microphones with three PG56 snare/tom microphones and one PG52 kick drum microphone. It also includes three A50D drum mounts, four 15-foot XLR-XLR cables, and a durable carrying case... |
 |
Pacific Drums by DW SINGLE TOM CLAMP 10.5 MM
List Price: |
DescriptionThis clamp connects to a cymbal stand and has a ball-and socket tom arm which will hold any single tom with a 13/32" (10.5mm) bracket. |
